Product DescriptionSpecification* Crimping range: 0.5-16mm²* Output:2.5T* Voltage range: AC 220V* Weight: 10kg* Overall dimension: 140*220*320mmBenefits* Automates your hand tools* Eliminates operator hand faigue-foot pedal controls the unit* Low cost alternative to automatic crimping machines* 10 time faster than manual cirmping* Multi-funtion operations* Portable and lightweight* Small bench top footprint1. Connect foot perdal to the foot pedal joint2. Connect the attaching plug to the power supply3. Connect the grounding plug to the power supply4. Turn on power switchPicture one1. Screw off the phillips screws2. Remove the protection coverPicture two1.Embed the lower die2.Screw on the phillips screws3.Embed the top die4.Screw on the phillips screwsPicture three1. Imbed the cable into the cable connector2. Step down the foot pedal3.Until crimping dies are closed completely4. The crimping dies are automatically opened5. Loosen the foot pedal6. Take down the well-crimped cable joint1. Pre-plug 2-in-one insulation and crimping dies2. Coaxial crimping dies3. Small brass crimping dies4. Pre-Insulated Terminals crimping diesPayment