We design and make different types EPS foam coater to meet different customer’s requirement.
How to coat for EPS shape?
Foam coating is very simple, it can be done as follows:
1. Firstly mix the cement, sand and some additives together.
2. Put a layer of self-automatic fiberglass mesh on the EPS panel or EPS decorative shape.
3. Input the mixer on the hopper .
4. start the machine to coating.
5. Usually for EPS shape coating, we use chain(with tooth) for transmit. For the panel, we use belt for transmit. Because if we use chain also for the panel, it will appear some small holes on one side of the EPS panels.
How to coat for EPS shape?
Foam coating is very simple, it can be done as follows:
1. Firstly mix the cement, sand and some additives together.
2. Put a layer of self-automatic fiberglass mesh on the EPS panel or EPS decorative shape.
3. Input the mixer on the hopper .
4. start the machine to coating.
5. Usually for EPS shape coating, we use chain(with tooth) for transmit. For the panel, we use belt for transmit. Because if we use chain also for the panel, it will appear some small holes on one side of the EPS panels.