0-34m Gear Rack Building Material Hoist Lifts

Original
brand: KP-B05, KP-B06
price: Negotiable
minimum:
Total supply:
Delivery term: The date of payment from buyers deliver within days
seat: Fujian
Validity to: Long-term effective
Last update: 2018-07-28 22:04
Browse the number: 273
inquiry
Company Profile
 
 
Product details

0-34m Gear Rack Building Material Hoist Lifts 


Overview 

Truly modular design. Drive devices and cages are generic and interchangeable, and offers a multiple choice of doors or flaps. 

Q345 high quality steel to make the main parts of the KP-B05, KP-B06 construction elevators.  

A small crane available. 

Available in single or twin car.  

Manual or Automatic Controls. 

Certified TUV according to European Regulation EN 12159: 2009. 

Features 

* Apply high efficiency and energy-saving gear reducer.

* Racks set in the middle of mast section to make the machine run more stably and smoothly.

* No need adjustment non-eccentric rollers. 

* Cage roof is made by a full tread plate of which edges totally welded to ensure no leakage. 

* Unique flap door for loading/unloading ramp. 

* Be equipped with a frequency control unit (FC), with closed-loop.

* Composite Power & Control Cable, or Busbar.  

* Easy access to electrical panels.  

* Safety brake system. 

Technical data 

Payload   capacity  2,000 kg
Lifting speed           0–34 m/min.
Max. lifting height  400 m*
Cage width (internal)               1.5 m
Cage length (internal)                3.2 m
Cage height (internal)            2.35 m
Motor control                       FC control
Engine power 2x11 kw
Gearbox Helical reducer 
Safety device type                  centrifugal brake
Power supply range                380–500 V, 50 or 60 Hz, 3 phase
Type of mast                          square column 650*650 mm with bolted rack
Length mast section               1.508 m
Rack module           8
*  Be equipped with a frequency control unit (FC), with closed-loop.

  

About Lubrication of Hoist 

Attention: Lubricant of the reducer must be replaced after 40 hours of initial operation. 

In the table below, the interval time that base on ‘service hours’ must be followed firstly, ‘at least’ of lubrication frequency must be followed if the hoist is used discontinuously.

Hoist Lubrication Table

Interval    time

Parts and components

Lubricant

Notes

40   working hours or at least once a month

1.   Worm reducer

N320   worm gear lube

Check   the oil level, add if   oil lack

2. Racks and counter weight rail

Lithium   grease

Descent   the hoist and stop for 2-3 hours to congeal the grease

3.   Anti-falling safety device

Lithium grease

Load   the grease from the choke

4.   Guide wheel, cable and rail of cable trolley

Lithium grease

Coating,   to lubricate the sliding surface and bears in each parts

5.   Touch plates   of limit switches

Lithium grease

Lubricate   the friction surface

 

 

120 working hours or at least once   every 3 months

6. Rollers and back wheels

Lithium grease

Load   the grease from the choke to lubricate the bears

7. Mast section tubes

Lithium grease

Coating  

8. Cage doors   and enclosure doors

Lithium grease

Lubricate   the sliding surface and bears in each parts

9. Door interlock devices and surface of touch plates

Lithium grease

Lubricate   the sliding surface and bears in each parts

10.   Counter weight slide way and rope sheave, wire rope of gate

Lithium grease

Lubricate   the sliding surface and bears in each parts

400   working hours or at least once every half year

11.   Taper sleeve of motor brake

Lithium grease

Drop,   be sure not to drop on the frictional disk

12.Cage top crane and   sheaves

Lithium grease

Rotation   positions

1000   working hours or at least once 1 year

13.   Worm reducer

N320   worm gear lube

Replace   oil, discharge the dirty oil, clean the inner cavities by  kerosene, then add clean grease

Lubricant in our products is the above mentioned ones. Same quality lubricant can be used. Replacing lubricant of gearbox by other brand for the first time, must clean the internal of gearbox. Lubricant of different brands cannot mix and be used. For the gear reducers or other type reducers, please use the lubricant as per corresponding requirements when replacing lubricant. 

Warning: Lubricant is hazardous to skin and lung: always wear protective gloves and dirt proof mask.. 

Warning: Dropping risk: Be sure to use the anti-dropping device when getting up the protective fence to lubricate or check the racks or other items. 


http://www.comwinning.com/

Total0bar [View All]  Related Comments
 
more»Other products

[ Products search ] [ favorites ] [ Tell friends ] [ Print ] [ Close ]