Function Distribution ties are designed for securing conductors in the top groove of rigid insulators vertically mounted. This specific distribution tie provides perfect resistance to mechanical strain under all types of motion including aeolian vibration, galloping and sway. Distribution tie design takes into account a tie pad to protect the bare conductor from abrasion at the conductor insulator interface. Tie pads are not required with jacketed conductors. This product is manufactured with the same grade material| as the conductor to which it is applied. Mechanical strength Distribution ties have a slip load exceeding 3.5kN in unbalanced load conditions. This strength is usually sufficient to contain a broken conductor to a single span. Note The lay direction of distribution ties must be the same as that of the outer stranding of the conductor to which it is applied. Top ties -For insulated conductors Selection chart Model (naked wire) Model no. (insulation wire) Wire diameter Product Parameter Suitable International wire Min. Max. Color Num. Of one set LJ Comment insulation (10KV) thin-insulation (10KV) BDT6100 BDT6200 4.83 5.46 Blue 2 16 10 BDT6101 BDT6201 5.74 6.2 Brown 2 16 BDT6102 BDT6202 6.21 7.04 Orange 2 25 BDT6103 BDT6203 7.05 8 Purple 2 35 BDT6104 BDT6204 8.01 9.07 Red 2 50 BDT6105 BDT6205 9.08 10.29 Yellow 2 BDT6106 BDT6206 10.3 11.66 Blue 2 70 BDT6107 BDT6207 11.67 13.21 Orange 2 95 10、16 BDT6108 BDT6208 13.22 14.94 Red 2 120 25 BDT6109 BDT6209 14.95 16.89 Purple 2 150 25、35 35、50 BDT6110 BDT6210 16.9 19.18 Brown 2 185、210 50 70 BDT6111 BDT6211 19.2 21.79 Red 2 240 70、95 95、120 BDT6112 BDT6212 21.82 24.59 Blue 2 300 120、150 150、185 BDT6113 BDT6213 24.61 27.84 Green 2 400 185 240 Note：Suit for dextro naked wire and insulation wire. Material Helical rods: Aluminum alloy Application BDT… are used to insulated cables.